Forums

Re: Stick with G20s leval 59 or?

• TigerGaz 25 Posts

  Thu, May 17 2012 9:26 AM

  Hi all would you stick with the G2s or would you get the Ping leval 69 next ? I think the G20 s are abit poor out of any kind of rough and do come up short  sometimes and are considering changing to the ping s .I,m not concerned about meter speed as i am used to fast . Would appreciate any advice thankyou  .

• RUNWME 1,011 Posts

  Thu, May 17 2012 9:28 AM

  Stick with your g20s until you get to lvl 78 2.0 irons.  They are game changes compared to all irons before it.

  The most predictable combination I've ever used was  lvl 78 2.0 irons and lvl 35 callaway Z balls.

• pjctas0822 4,609 Posts

  Thu, May 17 2012 5:55 PM

  Run,

  Can someone use 2.0 Irons ,the G-20's level 59 driver/woods and the spider putter? 

  So we can mix n match all clubs? 

• RUNWME 1,011 Posts

  Thu, May 17 2012 6:51 PM

  Cant break up the iron set though any other combination is cool.

• Spammage 694 Posts

  Thu, May 17 2012 10:02 PM

  Yep - just don't want to mix/match to many meter speeds.  You will find some rounds you can ding the woods and not the irons and other rounds it will flip on you.  The rounds you get all of it working it is great.

• RUNWME 1,011 Posts

  Thu, May 17 2012 10:14 PM

  Spammage:

  Yep - just don't want to mix/match to many meter speeds.  You will find some rounds you can ding the woods and not the irons and other rounds it will flip on you.  The rounds you get all of it working it is great.

   

  Wedges and putters have different meter speeds than most irons woods and driver anyway.   I've never noticed much of playability difference of meter speeds.  Most legends  play with faster irons  speeds than any of rest of their clubs. Not a bad thing to get used to if you even for the lower tiers.

   

• pjctas0822 4,609 Posts

  Thu, May 17 2012 10:42 PM

  I see Thanks.

  All the wedges seem to have the same speed across the board. I miss the ding alot lol

  I dont mind the different speeds in meter which is why I need a more forgiving type of equipment. 

  I cant wait until i have enough credits to buy ....oh and get that level too. Thanks for the info guys.

• Spammage 694 Posts

  Thu, May 17 2012 10:44 PM

  I understand - but when you start mixing in too many different speeds it can become an issue.  I only switched to the R11 driver because I ran into issues with the G20 driver and the faster Burner/R11 irons.