navigater:
Would be nice to have more the one angle to read greens
I most cases you have at least 2 angles - from near or where the ball is , and from the other end, behind the hole. You can also usually. putt from either angle, and which ever angle you do putt from uses the break that angle shows. So if less break is shown from one of the 2 angles you may want to putt with that being the active angle.
You also have 2 green grid displays you can use - the fixed putting grid, and the movable 20 foot by 20 foot Chip/Pitch shot mode putting green grid that is attached to and centered on the aim point.
In Chip/Pitch shot mode left click and hold your cursor on the aim point box/point to see the grid and to move it. You get the most accurate read when you position the grid so the ball and the hole are in the same grid column. just don't forget to set your aim point where you want it for the putt. Some players purposely miss the ding to compensate for break on the green, some set the aim point some distance to the side of the hole, some do both and/or a combination of the 2.