Forums

Re: Changing Meters

• Golfitbytheocean 1 Posts

  Mon, Feb 10 2014 9:09 AM

  I wanted to know if all of my drivers/woods can have the same meter. It seems I have one meter for my driver and another for my fairway woods.

• ScottHope 10,457 Posts

  Mon, Feb 10 2014 2:57 PM

  The reason your meters are different is because you have the EZ swing wedges and putter in your equipment. Swap them for the starter clubs and you will get rid of the different meter.  Video help HERE if you need it.

  (Having re-read your post I hope you didn't mean differing meter speeds).

• Wheels65 744 Posts

  Mon, Feb 10 2014 5:25 PM

  The meter speed is determined by both the club and ball that you use. It is shown in the Pro Shop - the higher the number, the slower the meter.  You can slow the meter by buying more expensive balls - but I'd wait a while if I were you.  Without the proper equipment, high $ balls are silly waste of credits.

• mukbrain 225 Posts

  Mon, Feb 10 2014 7:48 PM

  ^Indeed.

  What clubs I would suggest is the ATVs at 38/39 or the L41/42 Pings (you're only 2-3 levels from that), and perhaps K15s or wait until 55 to get the G20s (its lower for a limited time, usually it's 58-59), and get the L35 Ghost Spider Putter. I used it until just today. And remove the hybrid for a 3rd wedge.

  The K15 PW goes 105, so these would work for wedges: Ping, 54, 60, 64; ATV, 56, 60, 64.

  The G20 PW goes 115, so for this it would be: Ping, 52, 58, 64; ATV, 54, 60, 64.

• ApexPC 3,164 Posts

  Tue, Feb 11 2014 12:50 PM

  i don't think it matters all that much if some of your clubs have different meter speeds.

  My clubs don't all have the same meter speed, and at my tier I have to contend with almost the maximum amount of VEM. I have worked out a method that works for me to usually be real close to, if not right on, the Ding!. So my scoring average continues to go down.