If there is way to remove some of the markers in Putter Pal, I think it would be better.
I don't use it now . . because of the markers.
Maybe keep the 1/4 - 1/2 - 3/4 , and lose the rest ?
Then I would use it.
thanks
Shoeman
Why not make your own. Just take a piece of paper and when in putter mode on the screen, mark the start and max spots on the paper. Then fold it in half and mark the 50% mark and so forth. Or if you currently have the putter pal you can just copy it on a piece of paper and cut it out and tape it to your monitor right below the meter bar. I found that the meter for the clubs is the same as for the putter. I just copied the putter pal for the other clubs and taped the one for the clubs above the putter one. Only difference is the zero and max points for putter and clubs meter is slightly off center.
Yes ...
I have my own.
I was just saying about the Putter Pal, why I use my own and not Putter Pal.
I would use P.P. is wasn't for all the markers.
The lines on a Pendaflex, 5" x 8" notepad are perfectly spaced to use for making your own Putter Pal.
Each line corresponds to 5% of the putt stroke.
http://www.pendaflex.com/enUS/Products/Note_Taking_Products/Writing_Pads/Note_Pads/Evidence__Pastel_Perforated_Pads.html
theShoeman: Yes ... I have my own. I was just saying about the Putter Pal, why I use my own and not Putter Pal. I would use P.P. is wasn't for all the markers.
I love the markers, at least the 10% marker. As even though I use Putter Pal I still try to use the avatar movement system in conjunction with Putter Pal and it really helps with distance control.