andyson:
I use a cthruview overlay that is very, very precise. Courtesy of DocMurphy's post. Here's a look at power set to 95%
Andy, can you help me with something on that post. I'd like to try that out, but I was wondering what was meant by this part...
"Step 4. Using the magic wand tool (also called other things depending on the software but its the tool that allows you to click in an area and select specific areas of the image) Click in the area of the picture where the inerior of the meter is for WGT. Make sure when doing this it only selects the area between the beginning of the meter and the first marker line before the ding line."
Going from the left side of the meter, do you copy to the line immediately to the left of the ding line (as suggested in his post) or just to the 0% power line (which would really be the 3rd line to the left of the ding line)? i.e the red or the green mark on this image?
Edit: It's not very clear in the image, but you can just about see a green and red mark next to 2 of the lines lol.